16
(1) Electric starter switch (2) i3s switch
(1) i3s switch
1
1
2
i3s (IDLE STOP START SYSTEM)
Starting & Warm up the engine:
There is an i3s switch provided to enable (2)
the rider for turning i3s mode “ON” or “OFF”
based on the traffic conditions.
2. i3s switch
Keep the i3s switch (1) to “OFF” position.
Turn the ignition key to “ON” ( ) position.
(2) i3s indicator
The i3s indicator (2) will glow on the
speedometer console for 2 seconds and turn
“OFF”. For the activation of i3s system, start
the engine and let it idle till the engine gets
warmed up or temperature reaches more than
75°C.
Keep the i3s switch (1) to “ON” position.
Turn the ignition key to “ON” ( ) position.
The i3s indicator (2) on the speedometer
console will glow for 2 seconds and turn
“OFF”. Start the vehicle (in neutral and clutch
lever released condition) with less than 2000
r/min and let it idle till engine temperature
reaches more than 75°C. The engine will
cut-off in 30 seconds. After the first stop
start, every subsequent stop will be in 5
seconds.
Initial activation of the i3s system:
In this condition, the engine can be restarted
either with clutch lever, kick or electric start.
2
To Next Page
Loading...
