•
+, - No. 2 Driver-1 No.
•
Grip -1 No.
The tool kit (1) is located below the seat in the
rear. Some emergency repairs, minor
adjustments and parts replacement can be
performed with the tools contained in the kit.
Kit consists of following tool:
•
Tool bag -1 No.
•
Box wrench 16x14-1 No.
•
Pin spanner-1 No.
TOOL KIT/FIRST AID KIT
25
WARNING
!!
CAUTION
!!
• While parking vehicle on side stand engage
the first gear.
• Park the vehicle on firm level ground to
prevent overturning.
• When riding in wet or rainy conditions, or on
loose surfaces the ability to stop the vehicle
reduces.
• When riding in wet or rainy conditions, or on
loose surfaces, apply front brake carefully
after applying rear brake to avoid wheel slip.
• When descending a long steep slope use
engine braking (power) by changing to lower
gears, with intermittent use of both brakes.
Continuous brake application can overheat
the brakes and reduce their effectiveness.
• Wherever possible, reduce speed or apply
brake before entering a turn, closing the
throttle or braking in mid turn may cause
wheel slip. Wheel slip will reduce control
over the vehicle.
• All your actions should be smooth under
these conditions. Sudden acceleration,
braking or turning may cause loss of control.
For your safety, exercise extreme caution
when braking, accelerating or turning.
• Extreme braking may cause wheel locking
and reduce control over the vehicle.
After stopping the vehicle, shift the
transmission to neutral, turn the ignition
switch “OFF” ( ), park the vehicle on main
stand, lock the steering and remove the key.
PARKING
(1) Tool kit (2) First aid kit
To stop the vehicle, press the rear brake pedal
for the application of front and rear brakes
simultaneously. However, for more effective
braking, it is advised to apply front and rear
brake simultaneously, keeping the throttle in
closed position.
For integrated braking system (IBS)
12
To Next Page
Loading...
