43
NOTE
Visit Authorised Hero MotoCorp workshop
for inspection, cleaning, lubrication and
adjustment of drive chain at every 2000 km.
•
Lubricate the drive chain by applying liberal
amount of SAE#90 oil.
CAUTION
!!
Regular adjustment and lubrication as per the
maintenance schedule would ensure high
performance and longer life.
reached. For replacement, visit your
Authorised Hero MotoCorp workshop.
chain slider must be replaced if it is worn to the
bottom of the cutout or wear limit (2) is
Check the drive chain slider (1) for wear, the
DRIVE CHAIN SLIDER INSPECTION
(Refer to “Maintenance Schedule” on
(page 28).
(1) Drive chain slider (2) Wear limit
2
1
(1) "MIN" mark
Location: Right handlebar.
Master Cylinder/Reservoir.
Brake fluid recommended: DoT 3 or DoT 4
Fluid level-Ensure that the brake fluid level
does not fall below “MIN” mark (1) on the
master cylinder, when checked with the
master cylinder parallel to the ground. The
level decreases gradually due to piston
movement to compensate pad wear. If the
level decreases abruptly, check for leakage in
the brake system and contact your Authorised
Hero MoroCorp workshop.
Brakes (Integrated braking system)
Brakes are items of personal safety and should
always be maintained with proper adjustments.
When one applies the Integrated/Rear brake
pedal, front & rear brakes activate jointly.
(a) Front brake inspection (Disc type)
BRAKES
MIN
1
To Next Page
Loading...
