HERON HT240 pro - View Zone Names; Pump Configuration; Pump Prime Time

To Next Page

To Previous Page

c. View Zone Names

Select “ZONE INFO” from the Main Menu and the Zone Menu will be displayed.

Select “ZONE NAME” from the Zone Menu. The following screen will be displayed showing zone names.

Press the MENU key to return to the Zone Menu.

Pump Configuration

Select “PUMP CONFIG” from the Main Menu. The Pump Menu will be displayed.

a. Pump Prime Time

A pump prime pressurisation time can be set for each of the pumps connected to your controller.

Select “PUMP PRIME” from the Pump Menu.

Pump pressurisation times are set in minutes and seconds.

Position the cursor over the minutes and seconds fields. Use the number keys to set the pump pressurisation

time for each pump.

Press the MENU key to return to the Pump Menu screen.

ZONE NAME

ZN NAME SN CD

1 VALVE 1 012345 2W1

2 VALVE 2 000000 2W1

3 VALVE 3 000000 2W1

4 VALVE 4 000000 2W1

5 VALVE 5 000000 2W1

PUMP PRIME

1 PUMP 1 0:00

2 PUMP 2 0:00

3 PUMP 3 0:00

4 PUMP 4 0:00

5 PUMP 5 0:00