Set this option from 000 to 099 to specify the number of flow faults to be detected before the irrigation is
stopped.
35. Week Auto Extra
WARNING – this option should be set to 001 as default.
If this option is set to 000, then the options to start a program on the following basis will be lost on the
“WEEKLY START” screen.
Daily
On the odd days of the week – based on a 14 day count,
On the even days of the week – based on a 14 day count
5 days a week (Monday to Friday)
Weekend (Saturday – Sunday).
40. Remote Start Prog
Set this option to the program number of the program to be run when the remote input “C2-I1” is closed.
The program will run once when the contact is closed. The program will not be initiated again until the remote
input contact is opened and then closed again.
41. Remote Start Type
Caution – the default value for this option is 000.
If this option is set to 001 then the program assigned to the remote input “C2-I1” will run continuously when
the contact is closed. It will continue to run until the contact is opened.
47. Group Percent
Set this option to 001 to display “GROUP PERCENT” in the Main Menu.
PROG PERCENT
GROUP01 PERCENT 100 %
GROUP02 PERCENT 100 %
GROUP03 PERCENT 100 %
GROUP04 PERCENT 100 %
GROUP05 PERCENT 100 %
To Next Page
Loading...