Electrical Conformity
USA This product has been certified as an FCC Class B device.
Declaration of Conformity
We herewith declare that all products manufactured by the company below meet the requirements of EC
directives.
Applied Standards Are:
EN 50081-1 EMC Generic Emission
EN 50082-2 EMC Generic Immunity
To comply the product must be permanently installed in accordance with the installation instructions
provided and the electrical supply must be sinusoidal.
Heron Electric Co Ltd,
Unit G15 Rudford Industrial Estate, Arundel, England
Changing Controller Options
This section describes the basic configuration options you can set on your controller. Your controller has 13
basic configuration options. If you need to use the more advanced features of the controller please refer to
the ‘Advanced Options’ manual.
WARNING
Do not adjust Advanced Configuration Options without referring to the “Advanced
Options” manual.
Keep a record of any options values before and after a change.
Always fully test any new configuration values after you have changed them to
ensure the controller functions as you require.
Your Installer may have already set your installer or dealer may have already set
your controller to the required values.
To access the controller’s basic configuration select OPTIONS from the Main Menu.
To Next Page
Loading...