An automatic start must be activated in order for it to work. Move the cursor over the “OFF” field and
press the “OK/Select” key. “OFF” will change to “ON”. The automatic start has now been activated. When
the cursor is moved to the next row on the screen, the end time of the program will be calculated and displayed
Press the MENU key to return to the Auto Menu.
Press the MENU key to return to the Main Menu.
4. Skip Day Starts
Skip a day starts allow you to run a program and then miss a specified number of days before the automatic
start is activated again.
Up to 32 skip day starts can be specified.
Select “”SKIP DAY STARTS” from the Auto Menu.
Select the skip day start to be entered or edited.
Enter the program number, start time in hours and minutes and the number of days you want to skip before
this auto start is activated again.
For example, if the Skip Days is set to “01” then this start will activated every other day.
The next time the auto skip start will be activated and the end time of the program are automatically displayed.
A skip day start must be activated in order for it to work. Move the cursor over the “NO” field and press
the “OK/Select” key. “NO” will change to “YES”. The automatic start has now been activated.
When the cursor is moved away from this field to the end time of the program will be calculated and displayed.
6. Number of Programs
Set this option to the number of irrigation programs you need. The controller can support from 1 to 28 irrigation
programs.
AUTO SKIP 1
PROG 01 ACTIVE NO
START TIME 00:00
SKIP DAYS 00
DAY COUNT 00
NEXT START TODAY 07/04/22
END TIME ______
To Next Page
Loading...