Table of Contents
About the Controller 5
Installation 5
Mounting the Controller 5
Connecting Mains Supply 5
Installing Decoders 5
Pump / Master Valve Outputs 7
Cable Earth Points 7
More Inputs and Outputs 8
Start Input 8
Suspend Input 8
Flow Meter Input 8
Climatic Sensor Input 8
24VAC Permanent Output 8
Getting to know Your Controller 9
Resetting the Clock and Date 9
Set Up and Edit an Automatic Starts 10
Set Up and Edit Program Names 11
Set Up or Edit Program Information 12
Set Up and Edit Zone Information 14
a. Zone Configuration 14
b. Change Zone Name 14
c. View Zone Names 15
Pump Configuration 15
a. Pump Prime Time 15
b. Assign Pumps to Zones 16
Starting and Stopping 16
a. Program Start 16
b. Zone Start 17
c. Pump Start 17
d. Manual Stop 17
Short Cuts 18
a. Set All 18
b. Manual Advance 18
Log 19
Electrical Conformity 20
To Next Page
Loading...