1. Number of Zones
Set this to the number of zones attached to your controller. The maximum number of zones will depend on
the size of the controller purchased.
2. Number 24hr Starts
If you need to increase or decrease the number of automatic starts allowed within a 24 hour period, use this
option. Enter the required number of automatic starts.
The number of automatic starts on the “24HR STARTS” screen will be the same as the number entered here.
If you do not want any 24 hour starts set this Option to 000.
3. Number Weekly Starts
If you require weekly starts, enter the number required under this option. If you do not want any weekly starts
set this option to 000.
If this option is activated then “WEEKLY STARTS” will appear as an additional item on the Auto Menu.
Select “”WEEKLY STARTS” from the Auto Menu.
Use the arrow and number keys to select the program you want to assign a weekly start to.
With the cursor positioned on the “DAY” of the week, press the “OK/Select” key to toggle through the start
options. The following options are available:
A specific day of the week
Daily
On the odd days of the week – based on a 14 day count, (Monday week - 1 day 1 is odd, Monday
week 2 - day 8 is even).
On the even days of the week – based on a 14 day count
5 days a week (Monday to Friday)
Weekend (Saturday – Sunday).
The start time of the program should be entered using 24 hour clock times.
WEEKLY START
DAY TIME ACTIVE END
1 PROG 01 MON 0:00 OFF ____
2 PROG 01 MON 0:00 OFF ____
3 PROG 01 MON 0:00 OFF ____
4 PROG 01 MON 0:00 OFF ____
5 PROG 01 MON 0:00 OFF ____
To Next Page
Loading...