HERON HT240 pro - Assign Pumps to Zones; Starting and Stopping; Program Start

16
b. Assign Pumps to Zones
To assign a pump to a particular zone select “ZONE ASSIGN” from the Pump Menu.
To assign a pump to a particular zone, position the cursor over the relevant field and press the “OK/Select”
key. “NO” will change to “YES”.
Press the MENU key to return to the Pump Menu.
Note: “SPARE” option on the Pump Menu is not currently allocated to a function.
Press the MENU key to return to the Main Menu
Starting and Stopping
To manually start a program, a zone or a pump, press the START key to display the Start Menu
.
a. Program Start
Select “START PROG” from the Start Menu.
Enter the program number of the program you want to start and press the “OK/Select” key.
Press the Menu key to return to the Start Menu.
PUMP ASSIGN
PUMP P1 P2 P3 P4 P5
ZONE 01 YES NO NO NO NO
ZONE 02 YES NO NO NO NO
ZONE 03 YES NO NO NO NO
ZONE 04 YES NO NO NO NO
ZONE 05 YES NO NO NO NO
START PROG
---------------------------------
ENTER PROG 1
--------------------------------------------
NAME Grass01