Hot surface
During operation or a time period after the operation, the product's enclosure can be hot.
•
To prevent discomfort or even burns, do NOT touch the product's enclosure with your skin.
•
To prevent fires, do NOT keep flammable materials away from the product's enclosure.
•
If a hot surface sign is provided on the product's enclosure, the product will be embedded into other equipment. Please make sure the sign is
not blocked from view. In case the sign is not visible from the outside, make sure to take effective measures to warn any third party of the hot
surface hazards.
Certain product models support active heating of the cover lens to reduce the impact of ice and frost. Users can turn off this function.
•
While active heating is ON, please avoid direct skin contact with the cover lens.
•
For each product model, the location of the cover lens is illustrated in the Introduction section of the product's user manual.
Peripherals
The product may be used along with accessories and devices, such as suction cup mounts, extension cables, power supplies, network devices,
GPS/PTP devices, and cleaning equipment. Please refer to all relevant specifications in the product's user manual, or contact Hesai technical
support. Using off-spec or unsuitable devices may result in product damage or even personal injuries.
Firmware and software upgrading
Make sure to use only the upgrade files provided by Hesai Technology. Make sure to observe all the instructions provided for that upgrade file.
Customized firmware and software
•
Before using a customized version of firmware and software, please fully understand the differences in functions and performance between the
customized version and the standard version.
•
Make sure to strictly follow all the instructions and safety precautions provided for that customized version. If the product does not function as
anticipated, stop using the product immediately and contact Hesai technical support.
-8-
To Next Page
Loading...
Need help?
General
