HGST G460-J-12 Installation Guide

Note: While handling ESD sensitive components, it is recommend that you are using proper ESD
equipment.
Table 31: Expansion Cable Hardware
QuantityPart Description
1 per system expansionExpansion Cable
Note: A
maximum of 4
systems can be
connected
together.
To install the expansion cable, do the following:
Note: To complete the following steps, you must have at least 2 enclosures installed. Repeat the steps as necessary,
up to a maximum of 4 times.
1.
From the enclosure, turn the thumbscrews that secure the enclosure in the rack counterclockwise.
Figure 45: Enclosure Thumb Screws (Counterclockwise)
56
Installation Guide 11 Installing the 4U60 Storage Enclosure

HGST G460-J-12 Specifications

General

Brand	HGST
Model	G460-J-12
Category	Enclosure
Language	English