Telnet Command Command Purpose Command Format
media Display information about the
installed media in the Printer.
list media
net Display information about the
current network settings of the
Ethernet interface.
list net
stored net Display information about the
stored network settings of the
Ethernet interface.
list stored net
default net Display information about the
default network settings of the
Ethernet interface.
list default net
user Display information about the
defined User names and their type
(root or guest privileges).
list user
lpq Display information about print
jobs and their settings.
list lpq
printer Display information about the
Printer (i.e., model number,
Firmware version and serial
number).
list printer
printer sm Display information about the
secure mark settings of the
Printer.
list printer sm
contact Set the contact string. set sysinfo contact [<STRING>]
location Set the location string. set sysinfo location [<STRING>]
label Set the label string. set sysinfo label [<STRING>]
sysinfo
from Set all strings from
default or current
settings.
set sysinfo from default|current
name Change the name of a
system log path
set logpath <LOG_NAME>
name <NEW_NAME>
set
logpath
type Change the type of a
system log path. This
starts or stops logging
on start of jobs or on
set logpath <LOG_NAME> type
[[-]job] [[-]pfault]
DTC1000/4000/4500 Ethernet User Guide – Installation Guide L001411 (Rev.1.0)
14
To Next Page
Loading...
Need help?
General
