5 Login as a root User if you are so prompted. (Note: Any change of a setting
will only be accepted after you have successfully logged in.)
Setting up Email Event logging
Follow this procedure to enable logging using email notification:
Step Procedure (Specify email logging)
1 Select the System Log link.
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3 Select the Email radio button to choose email log notification.
4 Enter a valid e-mail address in the associated textbox.
5 Select Submit.
6 Log in as a root User if you are so prompted. (Note: Any change of a
setting will only be accepted after you have successfully logged in.)
DTC1000/4000/4500 Ethernet User Guide – Installation Guide L001411 (Rev.1.0)
34
To Next Page
Loading...
