4 Select the Printer Error checkbox to generate the log entries for each
Printer Error.
5 Select the Submit button.
6 Login as a root User if you are so prompted. (Note: Any change of a
setting will only be accepted after you have successfully logged in.)
Selecting the Log Destination
Specify one destination for the log.
Step Procedure (No event logging)
1 Select the System Log link.
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3 Select the None radio button when no log is required. (Note: This is the
default.)
4 Select Submit.
DTC1000/4000/4500 Ethernet User Guide – Installation Guide L001411 (Rev.1.0)
33
To Next Page
Loading...
