leave it blank if you want to remove the old password.
6 Select the Submit button.
7 Log in as a root User (using the password) if you are so prompted. (Note:
Any change of a setting will only be accepted after you have successfully
logged in.)
Upgrading the Print Server
This procedure provides a means to upgrade the Firmware in Printer.
An alternative method for firmware upgrade. Upgrading the Printer Firmware using the
Workbench Printer Utility
Step Procedure
1 Select the Administration link.
2 Log in as a root User (using the password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully logged
in.)
3 Select the Upgrade link.
4 Select the Browse button.
5 Navigate to and select the appropriate file to upload.
DTC1000/4000/4500 Ethernet User Guide – Installation Guide L001411 (Rev.1.0)
40
To Next Page
Loading...
