Need help?Do you have a question about the High End Systems Technobeam and is the answer not in the manual?
General| Brand | High End Systems |
|---|---|
| Model | Technobeam |
| Category | Light Fixture |
| Language | English |
Warns about product modifications affecting safety and compliance with standards.
Details the warranty period for parts, labor, and specific components like LAD.
Procedure for returning products for repair, including obtaining RMA number.
Overview of Technobeam's programming capabilities and optics.
Details onboard memory, DMX control, and fixture-specific macros for programming.
Describes reflector system, lens sets, dichroic colors, and effects wheels.
Information on materials used for lens tube, bezels, side panels, and handles.
Recommendation for lamp type and power-saving features.
Lists additional features like remote focus, dimming, strobe, and power factor correction.
Details model numbers, dimensions, weight, electrical specs, and LAD.
Lists optional accessories available for the Technobeam fixture.
Instructions for unpacking and inspecting the fixture contents.
Guidance on installing the correct power cord cap based on location.
Step-by-step instructions for installing the fixture's yoke.
Procedure for setting the correct voltage and frequency for the fixture.
Instructions on how to adjust the fixture's beam angle and lens set.
Steps to power on the fixture and initial checks.
Explains the fixture's homing procedure upon power-up.
Information about the initial LED display showing software version.
Description of the three status LEDs and their indications.
Guidance on coordinating multiple fixtures with a DMX controller.
Explanation of the DMX 512 protocol for lighting control.
Recommendations for DMX cabling and its characteristics.
Instructions on how to build DMX data cables.
Information on constructing and using DMX link terminators.
Guidelines for setting up a DMX link with multiple devices.
Procedure for connecting fixtures to a DMX controller.
Precautions and suggestions for mounting the fixture in various orientations.
Guidelines for standing the fixture on its end handles.
Instructions for mounting the fixture to trusses or support systems.
Procedure for mounting the fixture to hang straight down.
Steps to select fixture type, control method, and assign address.
Explanation of Technobeam fixture protocols and DMX channel usage.
Guidance on choosing between DMX start channel or fixture number control.
Procedure for selecting DMX start channel for fixture control.
Guidance on using fixture number for control when channels are consistent.
How to assign unique fixture addresses for independent control.
Explanation of DMX channel ranges and fixture type requirements.
Method to calculate DMX start channels for fixtures in a link.
Method to assign unique fixture numbers for control.
Discussion on how mixing device types can lead to wasted DMX channels.
Methods for updating the fixture's operational software.
Procedure for transferring software between Technobeam fixtures.
Lists common symptoms and solutions for fixture problems.
Guide to diagnosing DMX data issues within the fixture or link.
Details common error messages and recommended actions.
Explains the capabilities of the Technobeam menu system.
Describes the function of the menu navigation buttons on the fixture.
Procedure for entering and exiting the fixture's menu system.
Provides a visual map and explanations of Technobeam menu options.
Detailed explanation of each menu option for fixture configuration.
Introduction to creating and playing back scenes using onboard memory.
Definition of a scene as a combination of configured fixture constructs.
Comparison of creating scenes using onboard memory versus a controller.
Explanation of selectable macros for simplifying programming.
Details preset capture and synchronized preset playback options.
Key points to remember when creating and playing back scenes.
Disclaimer that information and values are subject to change.
Explanation of the Enter and Menu keys' functions during scene creation.
Comparison of fast position selection versus MSpeed for wheel movement.
Guidance on choosing constructs and values for scene creation.
Step-by-step example of creating a scene on the fixture.
Procedure for positioning and powering the fixture.
Instructions for turning the fixture's lamp on via the menu.
Steps to open the fixture's shutter for light output.
Guide to adjusting the mirror's pan and tilt for desired positioning.
Instructions on how to focus the fixture on a litho pattern.
Steps to select color wheel functions, like random color selection.
Procedure to set the pause time for color wheel changes.
Instructions for selecting effects wheel positions and rotation speeds.
Guide to using superior optics for refocusing the image.
Procedure to set the delay time between programmed scenes.
Using scene copy feature to create Scene 2 from Scene 1.
How preset playback starts all programmed scenes in a loop.
Method to synchronize preset playback among multiple fixtures.
Steps for setting up fixtures for synchronized preset playback.
How to add more fixtures to a synchronized playback link.
Automating scene creation by capturing from a DMX controller.
Essential safety precautions for using the Laser Aiming Device (LAD).
Introduction to the Technobeam LAD and its positioning benefits.
Best practices for using the laser aiming device for optimal performance.
Specifies that only qualified personnel should operate the laser equipment.
How to control the laser using onboard programs, LCD controller, or DMX.
Methods for controlling the laser: menu system, DMX controller, or LCD controller.
Using the PRST menu and MACR construct to control the LAD.
Steps for controlling the laser via a DMX 512-compatible controller.
Common problems and solutions related to laser illumination.
Information on normal power loss over time and when to contact service.
Guidance on aligning the laser if it becomes out of position.
Troubleshooting steps when the emission indicator and laser are off.
Troubleshooting steps when the emission indicator is on but the laser is off.
Troubleshooting steps when the laser is on but the indicator LED is off.
Information on laser maintenance, primarily alignment procedures.
General safety precautions to follow before any servicing or maintenance.
Instructions for replacing the three fuses located on the fixture's circuit board.
How to remove and replace individual components within the fixture's wheels.
Details on dichroic, litho, and effects specifications for installation.
Diagram showing the location of wheels within the Technobeam fixture.
Procedure for changing individual dichroic filters in the color wheel.
Instructions for replacing lithos in the rotating litho wheel.
Steps for removing rotating lithos or effects from the wheel.
Procedure for removing static lithos from the rotating litho wheel.
Instructions on cleaning lithos using mild glass cleaner.
Guidance for installing rotating or static lithos correctly.
Detailed steps for replacing a static litho in the rotating litho wheel.
Instructions for replacing rotating lithos or effects.
Procedure for installing custom multi-colored lithos in metal holders.
Step-by-step guide for replacing the fixture's lamp.
Procedure to optimize lamp position for beam quality after replacement.
How to reset the lamp hour counter after changing the lamp.
Instructions for cleaning internal components like lenses and mirrors.
Steps to open the fixture to access internal components.
Instructions for cleaning dust and dirt from the fixture's door vents.
Guidance on cleaning anti-reflective glass, lenses, and mirrors.
Procedures for aligning the laser aiming device.
Safety precautions specific to the Laser Aiming Device (LAD).
Warning about accessing live high-voltage components.
Step-by-step guide for aligning the laser aiming device.
Applies to all protocols listed in this appendix.
Explanation of value display variations based on controller rounding.
Details 16-bit control for mirror and litho positioning.
Information on selectable macros for simplifying programming.
Comparison of fast movement versus MSpeed for color and litho wheels.
Explanation of shutter parameters like ramp and snap timing.
Definition of forward and reverse spin for wheel rotation.
DMX channel assignments for Technobeam full and reduced protocols.
DMX controller values for Technobeam-i constructs.
Table detailing MSpeed movement times for Technobeam, Technopro, or Technoray.
Lists macro channel assignments for Technobeam.
Shows conversion between fixture number and DMX start channel.
Shows factory configuration of litho, color, and effects wheels.
Safety warnings for fire, electric shock, UV exposure, and personal injury.
Safety warnings related to fire prevention during equipment use.
Safety warnings for preventing electric shock.
Safety warnings regarding protection against excessive UV radiation.
Safety warnings for preventing personal injury during operation.
To Next Page