High End Systems Technobeam - Copying User Presets and Settings (ALL); Copying User Settings (SETT)

3-18 Menu Options Technobeam
®
User Manual
6. Using the <Up> and <Down> arrow buttons, choose the “A
→
Β
” option
to copy user A presets to user B, or the “B
→
Α
” option to copy user B
presets to user A. Press the <Enter> button to select the desired
option.
Copying User Settings (SETT)
Use this menu item to copy the fixture’s user settings from user A to
user B or vice versa. The user settings for each user type are listed in
the section titled “Setting the User Type (USER)” on page 3-16.
Note
This options copies
all
user settings at one time.
To copy user settings:
1. Press and hold the <Menu> button until “ADDR” appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the “MODE” menu
and press the <Enter> button to select the “MODE” menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the “USER” menu
and press the <Enter> button to select the “USER” menu.
4. Using the <Up> and <Down> arrow buttons, scroll to the “COPY” menu
and press the <Enter> button to select the “COPY” menu.
5. Using the <Up> and <Down> arrow buttons, scroll to the “SETT” menu
and press the <Enter> button to select the “SETT” menu.
6. Using the <Up> and <Down> arrow buttons, choose the “A
→
B” option
to copy user A settings to user B, or the “B
→
A” option to copy user B
settings to user A. Press the <Enter> button to select the desired
option.
Copying User Presets and Settings (ALL)
Use this menu item to copy the fixture’s 16 user presets and fixture
settings from user A to user B or vice versa. The user settings for each
user type are listed in the section titled “Setting the User Type (USER)”
on page 3-16.
Note
This options copies
all
user settings and
all
16 presets at
one time.
To copy user presets and settings:
1. Press and hold the <Menu> button until “ADDR” appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the “MODE” menu
and press the <Enter> button to select the “MODE” menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the “USER” menu
and press the <Enter> button to select the “USER” menu.
or
or