High End Systems Technobeam - Page 172

Technobeam
®
User Manual Index-iii
ideal position .........................5-4
maintenance ............6-19 to 6-25
recommended operation .......5-3
safety .....................................5-2
specifications .........................1-2
troubleshooting ...........5-6 to 5-8
LED display ................................2-13
changing the output (DSPL) . 3-13
inverting (D/IN) ................... 3-13
LEDs
Emission Indicator ..........5-7, 5-8
Motor ..............................2-3, 2-4
Receive ............................2-3, 2-4
Transmit .........................2-3, 2-4
Lenses, installing ...........1-12 to 1-14
Light source ........................... intro-2
Line cord cap, installing ...............1-7
Link Busy ....................................2-27
Link Empty .................................2-27
Link, setting up ..................2-6 to 2-8
Linking fixtures ............................2-7
Lithos
aperture ring ..........................6-8
cleaning .................................6-8
cracked ................................2-22
custom ................................. 6-11
installing ................................6-9
replacing ....................6-7 to 6-11
specifications .........................1-4
LM01 .............................................5-5
LM30 .............................................5-5
Look .............................................4-2
Loop .............................................4-2
LROF .............................................5-5
LRON ............................................5-5
M
Macros ......................... 4-2, A-1, A-15
Menu key ......................................3-2
Menu system, accessing ...............3-2
Mode menu (MODE) ....................3-15
Model numbers ............................1-2
Motor LED ..............................2-3, 2-4
Mounting fixture ..............2-8 to 2-11
MSpeed change .............................4-3
MSpeed movement times A-12 to A-14
N
Narrow angle lens set .................1-14
Navigation buttons .....................2-13
Navigational keys .........................3-2
O
Optimizing the lamp ..................6-14
Optional accessories ....................1-5
Optoisolators ...............................2-6
Orienting lithos ............................6-9
Over Temp .................................2-28
P
Page ..............................................4-2
Pan
inverting (P/IN) ....................3-12
swapping pan and tilt
(SWAP) ..................................3-12
PGRM Time .................................2-28
Power cord cap, installing ............1-7
Powering on fixture ......................2-2
Preset programming
capturing .............................4-11
chase ......................................4-2
construct ................................4-2
example ...................... 4-4 to 4-9
fast change .............................4-3
loop ........................................4-2
macros ...................................4-2
MSpeed change ......................4-3
synchronizing ........... 4-9 to 4-11
Programming
capturing presets .................4-11
chase ......................................4-2
construct ................................4-2
example ...................... 4-4 to 4-9
fast change .............................4-3
loop ........................................4-2
macros ...................................4-2
MSpeed change ......................4-3
synchronizing ........... 4-9 to 4-11
Protocol, fixture specific ............2-13