PREDATOR XS TURNTABLE STRETCH WRAPPER OPERATION MANUAL
HIGHLIGHT INDUSTRIES, INC. ● 2694 PRAIRIE SW; WYOMING; MI 49519 ● 1-800-531-2465
V-1
TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDETROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE
The diagrams in this section will guide you in identifying typical problems while operating the
Predator Turntable Stretch Wrapper, and provide you with corresponding solution(s). Problems
are divided in reference to the machine functions: power, turntable, film carriage, and film delivery.
If further assistance is required, contact the distributor from whom you have purchased the
equipment, or call the number listed on the bottom page of this manual. To receive quick and
proper technical support, please be prepared to provide the following information:
1. Machine serial number
2. Date of purchase
3. Symptoms of any problem
Make sure that only qualified personnel will perform inspection,
troubleshooting, and part replacement.
Disconnect all power including external cont
present before servicing the frequency drive controllers. WAIT for 3
(three) minutes for the DC bus capacitors to discharge. The frequency
drive controller’ display and/or LED’s are not accurate indicators of
the absence of DC bus voltage.
To Next Page
Loading...
