HighPoint RocketRAID 3700 Series - Obtaining Logical Device Information; Maintenance Options (Normal Status)

17
Obtaining Logical Device Information
The Logical device tab is the default page after clicking the Logical tab of the HRM. This page contains information
about your RAID arrays and the individual disks your system detects.
Logical Device Information
Arrays you create and the properties associated with them will appear here.
Maintenance
Once an array has been created, the Maintenance menu provides options to maintain or edit it. To access the
Maintenance menu, click the Maintenance button towards the right-hand side of the array name.
Array Information
Clicking on the maintenance button will show you the Array information box. Different array statuses (Normal, critical,
disabled) will have different maintenance options.
Array Information &Maintenance Options: Normal Status
Arrays with the Normal status are healthy and functioning properly.
Arrays with the Normal status will have the following options:
Delete – deletes the selected RAID array
Verify – verifies the integrity of the RAID array
Rename – renames the RAID array.