Control Panel User Manual
52
538.
{2} The configuration item of 4 indicates keypad configuration.
{3} Keypad No.
{4} End the command.
There are three mode to add/delete zone for the partition,
adding/deleting separately, Adding/ Deleting continually and
adding/deleting in Batch, for details, refer to the Partition Keypad User
Configuration.
Partition Time and Control Panel Hijack Report Configuration
To configure the system time and hijack report, please see the command
below.
531 5 1 3 2 0 #
1 2
4
63 5
7
{1} System Time and Hijacking Report Programming Address: 531
{2} Classification Option of System Time and Hijacking Report: 5
{3} Entering Delay
To Next Page
Loading...
