User Manual of DS-7200/7300/8100 Series DVR
36
Figure 2. 9 HDD Management
7. Click Next to enter the IP Camera Management window (only supported by HDVR series).
Figure 2. 10 IP Camera Management
8. Click Search to search IP Camera. Click Add to add IP Camera (only supported by HDVR series).
9. After finishing IP Camera settings, click Next to enter the Record Settings window.
10. Click Next button to enter the Record Settings window.
1) Select the camera to configure.
2) Check the checkbox to enable Start Recording.
3) Select the recording mode to Normal or Motion Detection.
To Next Page
Loading...
Need help?
General