EasyManuals Logo

HIKVISION DS-7216HGHI-K1 User Manual

HIKVISION DS-7216HGHI-K1
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #173 background imageLoading...
Page #173 background image
Network Video Recorder User Manual
172
Configure PPPoE
If the device is connected to Internet through PPPoE, you need to configure user name and
password accordingly under System > Network > TCP/IP > PPPoE.
Contact your Internet service provider for details about PPPoE service.
Configure NTP
Purpose
Connection to a network time protocol (NTP) server can be configured on your device to ensure
the accuracy of system date and time.
Go to System > Network > TCP/IP > NTP.
NTP Settings
Check Enable.
Configure NTP settings as need.
Interval (min): Time interval between two time synchronizations with NTP server.
NTP Server: IP address of the NTP server.
NTP Port: Port of the NTP server.
Click Apply.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7216HGHI-K1 and is the answer not in the manual?

HIKVISION DS-7216HGHI-K1 Specifications

General IconGeneral
Product colorBlack
Channels quantity16 channels
Video compression formatsH.264, H.264+, H.265, H.265 Pro+, H.265+
Analog signal format systemNTSC, PAL
DC voltage12 V
Power consumption (typical)10 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
BNC input ports16
USB 2.0 ports quantity2
Ethernet LANYes
Number of users128 user(s)
Ethernet interface typeFast Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interfaceSATA, SATA II, SATA III
Maximum HDD capacity10000 GB
Weight and Dimensions IconWeight and Dimensions
Depth222 mm
Width260 mm
Height45 mm
Weight1100 g

Related product manuals