HIKVISION DS-7216HGHI-K1 User Manual

Network Video Recorder User Manual
186
FTP Upgrade Interface
Enter IP address of FTP Server Address.
Click Upgrade to start upgrading.
After the upgrading is complete, reboot the device to activate the new firmware.
Upgrade by Hik-Connect
After logging the device into Hik-Connect, the device would periodically check for the latest
firmware from Hik-Connect. If an upgrade firmware is available, the device will notify you when
you log in. You can also manually check for the latest firmware.
Before You Start:
Ensure the device has successfully connected to Hik-Connect, and it requires to install at least one
read-write HDD for firmware downloading.
Go to Maintenance > Upgrade > Online Upgrade.
Click Check Upgrade to manually check and download the latest firmware from Hik-
Connect.
The device will automatically check for the latest firmware every 24 hours. If it detects available
upgrade firmware, the device will notify you when you log in.
(Optional) You can switch on Download Latest Package Automatically to
automatically download the latest firmware package.
Click Upgrade Now.
Upgrade Camera
Purpose
You can upgrade multiple connected analog cameras supporting Turbo HD or AHD signal
simultaneously with DVR.

HIKVISION DS-7216HGHI-K1 Specifications

General

Product color	Black
Channels quantity	16 channels
Video compression formats	H.264, H.264+, H.265, H.265 Pro+, H.265+
Analog signal format system	NTSC, PAL
DC voltage	12 V
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	16
USB 2.0 ports quantity	2
Ethernet LAN	Yes
Number of users	128 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	SATA, SATA II, SATA III
Maximum HDD capacity	10000 GB

Weight and Dimensions

Depth	222 mm
Width	260 mm
Height	45 mm
Weight	1100 g