HIKVISION DS-7216HGHI-K1 User Manual

Network Video Recorder User Manual
185
Upgrade System
Purpose:
The firmware on your device can be upgraded by local backup device or remote FTP server.
Upgrade by Local Backup Device
Before You Start:
Connect your device with a local storage device with update firmware file.
Go to Maintenance > Upgrade > Local Upgrade to enter the local upgrade interface.
Local Upgrade Interface
Select the update file from the storage device.
Click Upgrade to start upgrading.
After the upgrading is complete, the device will reboot automatically to activate the
new firmware.
Upgrade by FTP
Before you start:
Ensure the network connection of the PC (running FTP server) and the device is valid and correct.
Run the FTP server on the PC and copy the firmware into the corresponding directory of your PC.
Go to Maintenance > Upgrade > FTP to enter the local upgrade interface.

HIKVISION DS-7216HGHI-K1 Specifications

General

Product color	Black
Channels quantity	16 channels
Video compression formats	H.264, H.264+, H.265, H.265 Pro+, H.265+
Analog signal format system	NTSC, PAL
DC voltage	12 V
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	16
USB 2.0 ports quantity	2
Ethernet LAN	Yes
Number of users	128 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	SATA, SATA II, SATA III
Maximum HDD capacity	10000 GB

Weight and Dimensions

Depth	222 mm
Width	260 mm
Height	45 mm
Weight	1100 g