Network Video Recorder User Manual
180
Configure DDNS
Purpose
You can set Dynamic DNS service for network access. Different DDNS modes are available:
DynDNS, PeanutHull, and NO-IP.
Before You Start
You must register DynDNS, PeanutHull and NO-IP services with your ISP before configuring DDNS
settings.
Go to System > Network > TCP/IP > DDNS.
Check Enable.
Select DynDNS under DDNS Type.
PeanutHull and NO-IP are also available under DDNS Type, and required information should be
entered accordingly.
Enter Server Address for DynDNS (i.e. members.dyndns.org).
Under Device Domain Name, enter the domain name obtained from the DynDNS
website.
Enter the User Name and Password registered in the DynDNS website.
DDNS Settings
Click Apply.
To Next Page
Loading...