HIKVISION DS-7216HGHI-K1 User Manual

Network Video Recorder User Manual
50
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Enter the password to activate the IP camera(s) connected to the device.
Optionally, check Export GUID, Security Question Configuration, or Reserved E-mail
Settings for password resetting in the future.
Click OK.
What to do next:
 When you have enabled Export GUID, continue to export the GUID file to the USB flash
drive for the future password resetting.
 When you have enabled Security Question Configuration, continue to set the security
questions for the future password resetting.
Set Security Questions
 When you have enabled Reserved E-mail Settings, continue to set the reserved email for the
future password resetting.

HIKVISION DS-7216HGHI-K1 Specifications

General

Product color	Black
Channels quantity	16 channels
Video compression formats	H.264, H.264+, H.265, H.265 Pro+, H.265+
Analog signal format system	NTSC, PAL
DC voltage	12 V
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	16
USB 2.0 ports quantity	2
Ethernet LAN	Yes
Number of users	128 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	SATA, SATA II, SATA III
Maximum HDD capacity	10000 GB

Weight and Dimensions

Depth	222 mm
Width	260 mm
Height	45 mm
Weight	1100 g