HIKVISION DS-7316HQHI-K4

Digital Video Recorder User Manual
9
 Configurable arming time of alarm input/output;
 Alarms for video loss, motion detection, video tampering, abnormal signal, video
input/recording resolution mismatch, illegal login, network disconnected, IP confliction,
record/capture exception, HDD error, and HDD full, etc.;
 Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email
and alarm output;
 One-key disarms the linkage actions of the alarm input;
 PTZ linking for the VCA alarm;
 VCA detection alarm is supported;
DS-7100 does not support VCA alarm.
 Supports POS triggered alarm;
 Supports coaxial alarm;
 System will automatically reboot when a problem is detected in an attempt to restore normal
functionality.
Other Local Functions
 Manual and automatic video quality diagnostics;
 Operable by mouse and remote control;
 Three-level user management; admin user can create many operating account and define their
operating permission, which includes the permission to access any channel;
 Completeness of operation, alarm, exceptions and log writing and searching;
 Manually triggering and clearing alarms;
 Importing and exporting of configuration file of devices;
 Getting cameras type information automatically;
 Unlock pattern for device login for the admin;
 Clear-text password available;
 GUID file can be exported for password resetting;
 Multiple connected analog cameras supporting Turbo HD or AHD signal can be upgraded
simultaneously via DVR.
Network Functions
 Self-adaptive 100M or 1000M network interface;
 IPv6 is supported;
 TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™ and HTTPS are
supported;
 Supports access by Hik-Connect. If you enable Hik-Connect, the device will remind you the
internet access risk and ask you to confirm the “Terms of Service” and “Privacy Statement”