HIKVISION DS-7316HQHI-K4 User Manual

Digital Video Recorder User Manual
127
Step 5 Select Linkage Action tab to set up alarm response action of video loss (please refer to
Chapter 8.7 Setting Alarm Response Actions).
Step 6 Click the OK button to complete the video loss settings of the channel.
Repeat the above steps to finish settings of other channels, or click the Copy button copy
the above settings to them.
8.4 Detecting Video Tampering
Purpose
Trigger alarm when the lens is covered and take alarm response action(s).
Step 1 Go to Menu > Camera > Video Tampering Detection.
Figure 8-12 Video Tampering Interface
Step 2 Select a Camera you want to detect video tampering.
Step 3 Check the checkbox of Enable Video Tampering Detection.
Step 4 Drag the sensitivity bar and choose a proper sensitivity level.
Step 5 Click to set handling method of video tampering. Set arming schedule and alarm
response actions of the channel.
1) Click Arming Schedule tab to set the arming schedule of response action.
2) Select one day of a week and up to eight time periods can be set within each day.
Time periods shall not be repeated or overlapped.

HIKVISION DS-7316HQHI-K4 Specifications

General

Product color	Black
Channels quantity	16 channels
Video compression formats	H.264, H.264+, H.265, H.265+
Analog signal format system	NTSC, PAL
Playback resolutions supported	3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Ethernet LAN	Yes
Ethernet interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	Serial ATA
Maximum HDD capacity	8000 GB
Number of HDDs supported	4
Power requirements	100 - 240 VAC
Power consumption (typical)	55 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	5000 g
Dimensions (WxDxH)	445 x 390 x 70 mm