Digital Video Recorder User Manual
135
Chapter 9 POS Configuration
This chapter is only applicable to DS-7300HQHI-K4 series DVR.
9.1 Configuring POS Settings
Step 1 Go to Menu > Configuration > POS > POS Settings.
Step 2 Select the POS from the drop-down list. Up to 8 POS units are selectable.
Step 3 Check the checkbox to enable the POS function.
Figure 9-1 POS Settings
Step 4 Filter the POS privacy information if needed.
1) Click after Privacy Settings to enter POS Privacy Information Filtering interface.
To Next Page
Loading...
