Digital Video Recorder User Manual
191
Figure 13-24 S.M.A.R.T Settings Interface
13.8 Detecting Bad Sector
Purpose
You can detect the bad sector of the HDD to check the status of the HDD.
Step 1 Go to Menu > Maintenance > HDD Detect > Bad Sector Detection.
Step 2 Select a HDD and click the Detect button to start detecting.
Figure 13-25 Bad Sector Detecting
Step 3 You can click the Pause button to pause the detection and click the Resume button to
resume the detection.
Step 4 If there is error information about the HDD, you can click the Error Info button to view the
information.
To Next Page
Loading...
