Digital Video Recorder User Manual
46
Step 1 Select Add IP Camera from the right-click menu in live view mode or go to Menu> Camera>
IP Camera.
For the IP camera detected online in the same network segment, the Security status shows
whether it is active or inactive.
Figure 2-34 IP Camera Management Interface
Step 2 Click the inactive icon of the camera to enter the following interface to activate it. You can
also select multiple cameras from the list and click the One-touch Activate to activate the
cameras in batch.
Figure 2-35 Activate the Camera
Step 3 Set the password of the camera to activate it.
Use Admin Password: When you check the checkbox, the camera (s) will be configured
with the same admin password of the operating DVR.
Create New Password: If the admin password is not used, you must create the new
password for the camera and confirm it.
To Next Page
Loading...
