Digital Video Recorder User Manual
51
Figure 2-41 Edit IP Camera
Channel Port: If the connected device is an encoding device with multiple channels, you can
choose the channel to connect by selecting the channel port No. in the drop-down list.
Step 2 Click OK to save the settings and exit from the editing interface.
Step 3 Drag the horizontal scroll bar to the right side and click the icon to edit the advanced
parameters.
Figure 2-42 Network Configuration of the Camera
Step 4 You can edit the network information and the password of the camera.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
