User Manual of All-in-One Network Video Recorder
34
Figure 2. 23 Right-click Menu
Option 2: Menu > Camera > Camera
2. Check the checkbox of Enable Auto Scan to Add. By default, the function is enabled.
Manual Adding
Steps:
1. Enter IP Camera Management interface.
Option 1: Right-click in the live view mode and click Add IP Camera.
Option 2: Menu > Camera > Camera
2. The online cameras with same network segment will be displayed in the camera list. Click the button to
add the camera.
3. To add other IP cameras
1) Click the Custom Adding button to pop up the Add IP Camera (Custom) interface.
Figure 2. 24 Custom Adding IP Camera Interface
2) Input the IP address, Protocol, Management Port, User Name and Password of the IP camera to be
added.
3) Click Add to add the camera.
The added IP cameras will be listed in the IP Camera Management interface. As shown below:
To Next Page
Loading...
