Main Elevator Controller User Manual
21
2. Check the device basic information (including the device name, the device type, the alarm
output No., the case, the device serial No. and the floor number) and the version information
(including the software version, the device language, and the hardware version).
3. (Optional) Edit the device name and the floor No.
4. Click Save to save the settings.
Checking Controller Working Status
Steps:
1. Click System Settings -> Controller Working Status to enter the Controller Working Status
page.
2. Check the floor status, the card reader status, the event trigger status, the alarm output status,
the auxiliary function status, the distributed elevator controller connection status. For more
information, refer to Table 6-1.
Table 6-1 Status Information Table
To Next Page
Loading...
