Main Elevator Controller User Manual
26
2. Input the card No.
Or check the Auto Obtain checkbox, and swipe the card on the external card reader to get the
card No.
3. Select a card type in the drop-down list.
You can select from normal card, card for door extended opening, card in blocklist, patrol card,
duress card, super card, visitor card and dismiss card. For detailed information about the card
information, refer to Table 6-2.
Table 6-2 Card Type Description
By default, the card is normal card.
Card for Door
Extended
Opening
The door will remain open for the configured time period for
the card holder.
The card swiping action will be uploaded and the floor
button cannot be controlled.
The card swiping action can used for checking the working
status of the inspection staff. The access permission of the
inspection staff is configurable.
The door can open by swiping the duress card when there is
duress. At the same time, the client can report the duress
event.
The card is valid for all the doors of the controller during the
configured schedule.
The card can be swiped for limited times. Configure the
parameter in the client software.
Swipe the card to cancel the alarm.
4. Click Settings to enter the Floor Permission Settings window.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
