HIKVISION DS-KD8003 Series

Set password and remarks and click to enable electric lock.
Click Save to save the sengs.
Call Sengs
Go to Intercom → Call Sengs to enter the page.
Congure Max. Call Duraon, Max. Message Duraon and Max. Ring Duraon, and click Save.
Note
●
Max. call duraon between the module indoor staon and client ranges from 90 s to 120 s. The
call will end automacally when the actual calling duraon is longer than the congured one.
●
Max. message duraon ranges from 30 s to 60 s. The message will end automacally when the
actual message
duraon is longer than the congured one.
●
Max. ring
duraon ranges from 65 s to 255 s.
Ring-Back Tone Sengs
Click Intercom → Ringbacktone Sengs to enter the sengs page.
Click Add to select the ring tone from PC.
Note
Available Audio Format: WAV、AAC, Size: Less than 600 KB, Sample Rate: 8000Hz, Mono.
Press Buon to Call
Steps
1.
Click Intercom → Press
Buon to Call to enter the page.
2.
Select Sub Module from the drop-down list.
Note
You can set No. of the sub module via the DIP switch.
3.
Fill in the room No. of the indoor staon in the blank of the Buon Seng column.
4.
Select
me schedule plan from the drop-down list. For more informaon about the me
schedule, please refer to Schedule Sengs .
5.
You can also view
buon image and set backlight.
6.
Click Save to enable the sengs.
Aer conguraon, you can press the buon on the module to call relave indoor staon.
DS-KD8003 Series Module Door Staon User Manual
99