HIKVISION DS-KD8003 Series User Manual

8.
Connect the cables.
1) Connect the cables from the wall and module-connecng line 1 to the corresponding
interfaces of the main unit, then place the main unit into the upper grid.
2) Connect the other end of the
module-connecng line 1 to the input interface of the sub
module. Connect all sub modules via
module-connecng lines.
3) Organize the cable with cable
e in the package. The suggested cable connecon picture as
shown below.
DS-KD8003 Series Module Door Staon User Manual
58

HIKVISION DS-KD8003 Series Specifications

General

Brand	HIKVISION
Model	DS-KD8003 Series
Category	Intercom System
Language	English