HIKVISION DS-KD8003 Series

OSD Sengs
You can customize the camera name, me/date format on the live view.
Steps
1.
Click Image → OSD to enter the sengs page.
Figure 6-13 OSD
2.
Check to enable Display Name, Display Date or Display Week at your actual needs.
3.
Edit the Camera Name.
Note
You can edit the camera name only when Display Name is enabled.
4.
Select from the drop-down list to set the Time Format and Date Format.
5.
Click Save to enable the sengs.
Target Cropping
Steps
1.
Click Image → Crop to enter the page.
2.
Check Enable Target Cropping to enable the
funcon.
3.
Click to capture photo.
4.
Click to start recording.
5.
Select Cropping
Resoluon.
6.
Click Save.
DS-KD8003 Series Module Door Staon User Manual
90