2) Enter the card No. manually or present the card in the card presenng area to obtain the card
No.
3) Tap OK to enable the sengs.
6.
Set User Role as Normal User or Administrator.
7.
Exit the
sengs page.
5.5 Network Parameters Sengs
The device support wired network, wireless network, cloud service sengs and hotspot.
5.5.1 Edit Wired Network Parameters
The device should be connected to the network.
Before You Start
Authencate and enter the menu rst. Refers to Authencaon via Admin for details.
Steps
1.
On the menu, tap Network → Wired Network to enter the sengs page.
Video Intercom Villa Door Staon User Manual
24