EasyManua.ls Logo

HIKVISION DS-MP3516-RS User Manual

HIKVISION DS-MP3516-RS
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Rail Network Video Recorder
User Manual
UD.6L0204D1165A01

Table of Contents

Other manuals for HIKVISION DS-MP3516-RS

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-MP3516-RS and is the answer not in the manual?

HIKVISION DS-MP3516-RS Specifications

General IconGeneral
BrandHIKVISION
ModelDS-MP3516-RS
CategoryNetwork Hardware
LanguageEnglish

Summary

Safety Instructions and Precautions

General Warnings and Cautions

Highlights serious injury/death risks from warnings and injury/damage risks from cautions.

Preventive and Cautionary Tips

Provides advice on installation, environment, and device handling to prevent issues.

Chapter 1: Introduction to Rail NVR

SIM Card Installation Guide

Step-by-step instructions for installing a SIM card into the Rail NVR for 3G functionality.

Hard Drive (HDD) Installation Procedure

Detailed guide on installing up to six 2.5-inch SATA HDDs/SSDs into the Rail NVR.

Wiring and Connection Requirements

Specifies requirements for power supply, network, IP cameras, video/audio output, and mouse connections.

Chapter 2: Getting Started and Basic Operations

Setting the Administrator Password

Guide for setting the initial admin password for device activation and security.

IP Camera Management Overview

Covers activating, adding, managing, and editing IP cameras connected to the system.

Chapter 3: Network Settings

Chapter 4: Record Settings

Configuring Recording Encoding Parameters

Settings for stream type, resolution, bitrate, video quality, and frame rate for recording.

Configuring Recording Schedules

Setting up recording schedules, including pre-record and post-record times.

Configuring Motion Detection Recording

Setting up recording triggers and linkage actions for motion detection events.

Configuring Alarm Triggered Recording

Setting up recording triggers and linkage actions for alarm input events.

Chapter 5: Video Search and Export

Searching Recorded Videos

Procedure to search for recorded video files based on time, camera, and video type.

Exporting Recorded Videos to USB

Procedure to export recorded video clips to a USB flash drive for backup.

Chapter 6: Basic Settings

Chapter 7: Other Settings

Chapter 8: HDD Settings

Initializing the Hard Disk Drive (HDD)

Procedure to format and initialize the HDD for video data storage.

Chapter 10: Maintenance Operations

System Upgrade Procedures

Instructions for upgrading the Rail NVR firmware via USB flash disk or FTP server.

System Restore to Default or Factory Settings

Procedures to restore the Rail NVR to its default or factory settings.

Chapter 11: Shutdown and Reboot

Related product manuals