HIKVISION DS-MP3516-RS - Chapter 4 Record Settings; Configuring Encoding Parameters; Initializing the HDD; Configuring Record Settings

Rail Network Video Recorder User Manual
31
Chapter 4 Record Settings
4.1 Configuring Encoding Parameters
4.1.1 Initializing the HDD
Before you start:
Install at least one HDD on the Rail NVR for video data storage.
Steps:
1. Enter the HDD Management interface.
Main Menu > HDD
Figure 4. 1 HDD Management
2. Select the Hard Disk you want to format from the drop-down list.
3. Click the button and click OK in popup confirmation window to start formatting.
4.1.2 Configuring Record Settings
Purpose:
You can configure the transmission stream type, the resolution, frame rate, etc.
Steps:
1. Enter the Record Settings interface.
Main Menu > Basic Settings > Record