Rail Network Video Recorder User Manual
22
Manual Activation
Purpose:
You can activate the IP camera by setting your custom password.
Steps:
1. Enter IPC Settings interface.
2. Click to select IPC you want to activate.
3. Click the button to enter Manual Activation interface.
4. Create a password by inputting the same password in both New Password and Confirm.
5. Click OK to save the password and activate the password.
Figure 2. 7 Manual Activation
2.4.2 Adding IP Camera
Purpose:
The online IP cameras in the same network segment with the system would be displayed on a list.
Quick Adding
Purpose:
Quick adding is designed for the IPC with the same password with your Rail NVR.
Steps:
1. Enter IPC Settings interface.
2. Click to select the IPC you want to add.
3. Click the button to add it.
Manual Adding
Purpose:
You can manually add the IP cameras that are not in the same network segment with your Rail NVR.
Steps:
1. Enter IPC Settings interface.
2. Click the button to enter Add IP Camera Manually interface.
To Next Page
Loading...
Need help?
General
