HIKVISION DS-TCG405-E User Manual

5.3 Set DDNS
You can use the Dynamic DNS (DDNS) for network access. The dynamic IP address of the device can
be mapped to a domain name resoluon server to realize the network access via domain name.
Before You Start
●
Register the domain name on the DDNS server.
●
Set the LAN IP address, subnet mask, gateway, and DNS server parameters. Refer to "Set IP
Address" for details.
●
Complete port mapping. The default port is 80, 8000, and 554.
Steps
1.
Go to
Conguraon → Device Conguraon → System Conguraon → DDNS .
Figure 5-4 Set DDNS
2.
Check Enable DDNS.
3.
Enter the server address and other
informaon.
4.
Click Save.
5.
Access the device.
By Browsers
Enter the domain name in the browser address bar to access the device.
By Client Soware Add domain name to the client soware. Refer to the client soware
manual for specic adding methods.
Entrance and Exit Capture Camera User Manual
29

HIKVISION DS-TCG405-E Specifications

General

Brand	HIKVISION
Model	DS-TCG405-E
Category	Security System
Language	English