HIKVISION DS-TCG405-E - 6.3 Set Record Schedule

6.3 Set Record Schedule
Set record schedule to record video automacally during congured me periods.
Before You Start
Install the memory card, and you are recommended to set the video quota
rao as not 0.
Steps
1.
Go to Conguraon → Device Conguraon → Encoding and Storage → Record Schedule .
Figure 6-5 Set Record Schedule
2.
Oponal: Check Enable Recording Overwring.
When the storage is full, the earliest videos will be overwrien.
3.
Check Enable Record Schedule.
4.
Click Edit to edit the record schedule.
1) Select Customize.
2) Set the start
me and end me.
3) Oponal: Select the other days and click Copy to copy the sengs to other days.
4) Click OK.
5.
Click Save.
Entrance and Exit Capture Camera User Manual
36