HIKVISION DS-TCG405-E - 7.5 Set OSD

5) Select the xed area that needs to be adjusted and drag the mouse to adjust its posion.
6) Click Stop Drawing.
4.
Enter Area Name and select ROI Level.
Note
The higher the ROI level is, the clearer the image of the detected area is.
5.
Click Save.
6.
Oponal: Select other area codes and repeat the steps above if you need to draw mulple xed
areas.
7.5 Set OSD
You can customize OSD informaon on the live view.
Steps
1.
Go to Conguraon → Device Conguraon → Text Overlay → OSD Sengs .
Figure 7-4 Set OSD
2.
Set OSD aribute, size, color, etc.
Note
The supported funcons vary with dierent models. The actual device prevails.
Entrance and Exit Capture Camera User Manual
45