HIKVISION DS-TCG405-E - 6.2 Set Quota

Figure 6-4 Set Cloud Storage
2.
Check Enable.
3.
Set the server parameters.
1) Select Version.
2) Enter Access Server IP Address and Port No.
3) Enter accessKey and secretKey of the resource pool.
4) Enter the ID according to the storage area No. of the server.
Note
Enter User Name and Password if you select V1.0.
4.
Click Save.
6.2 Set Quota
Set the video and picture rao in the storage.
Before You Start
Install the memory card.
Steps
1.
Go to
Conguraon → Device Conguraon → Encoding and Storage → Storage Management .
2.
Set Capture Quota Rao and Video Quota Rao according to the actual needs.
Note
The percentage sum of the capture and video quota rao should be 100%.
3.
Click Save.
What to do next
Format the memory card aer the sengs.
Entrance and Exit Capture Camera User Manual
35