HIKVISION DS-TCG405-E - 6.1.3 Set Listening Host; 6.1.4 Set Cloud Storage

6.1.3 Set Listening Host
The listening host can be used to receive the uploaded informaon and pictures of the device
arming alarm.
Before You Start
The listening service has been enabled for the listening host, and the network
communicaon with
the device is normal.
Steps
1.
Go to
Conguraon → Device Conguraon → System Conguraon → Network Parameters .
Figure 6-3 Set Listening Host
2.
Set ANPR IP Address/Domain and ANPR Port if you need to upload the alarm informaon.
3.
Set Listening Host IP Address and Listening Host Port, and check Enable Picture Uploading
Listening if you need to upload pictures.
4.
Click Save.
6.1.4 Set Cloud Storage
Cloud storage is a kind of network storage. It can be used as the extended storage to save the
captured pictures.
Before You Start
●
Arrange the cloud storage server.
●
You have enabled level 1 arm in Real-Time Picture.
Steps
1.
Go to
Conguraon → Device Conguraon → Encoding and Storage → Cloud Storage .
Entrance and Exit Capture Camera User Manual
34