HIKVISION DS-TCG405-E - Page 58

Before You Start
Please check the video encoding type. ROI is supported when the video encoding type is H.264 or
H.265.
Steps
1.
Go to
Conguraon → Device Conguraon → Encoding and Storage → ROI .
Figure 7-3 Set ROI
2.
Select Stream Type.
3.
Set ROI region.
1) Check Enable.
2) Select Area Code.
3) Click Draw Area.
4) Drag the mouse on the live view image to draw the
xed area.
Entrance and Exit Capture Camera User Manual
44